Illuminate Your Creations! ✨
The 3D Printer UV Resin Curing Light features 6 high-power 405nm UV LEDs that cure resin prints in just 10-15 seconds, making it an essential tool for both DIY projects and professional applications. With a 360° rotating stand, it ensures thorough curing and optimal display of your 3D printed items. Safety is prioritized with strong UV output, requiring eye protection during use.
B**L
Nothing to do, it jst works great.
Light works great-turn light on, table turns automatically, curing starts. After curing ends turn light off turntable runs for about 5 seconds more then stops. Nice. I did read some reviews about the battery. Its a single AA that appears to be used if you want to display something and just let it run. Not needed for curing, the UV light runs it via the surrounding sensors on the base of the turntable. Recommended.
A**E
Great low budget option
We purchased this with some smaller pickle containers that have baskets to create a low-budget wash and cure station. This set works excellently and the light sets the platform to spinning right away. To keep the light contained for the few minutes it is on, I put a fabric cube over it, which fit perfectly!
J**A
Spinner broken
Love the light however the spinner is broken. All parts rattling inside. So upset
M**C
very bright light for resin curing
this is a very bright light and a good little turntable for curing resin prints and making your own curing box, fun note if you find a timer controller that uses 120v you can set up a nice little curing station for a ton less than the prebuilt ones.
Q**W
On the turn table
Light works great.I thought the turn table was a dud because after adding the battery nothing, 30 minutes under the us light nothing. So i put it in the sun for a full day and after about 8 hours of sunlight it started to turn. I figured o great itll work for like an hour max out of the sun. Been over 72 hours without light and its still spinning. All in all works great, but you should add a note about charge time to avoid all the 1 star reviews because it didn't work right away. I was almost one of them.
T**T
Looking for an inexpensive curing station? This is it!
Cures resin printed models well. The turn table is a nice addition, it automatically turns on when the UV light is on and pointed at it. There's a slot for a AA battery if needed. Rarely do I need to manually spin it to get it going, had to do it once or twice, but once it's spinning it won't stop (unless you turn off the UV light). Light is made out of thin aluminum but seems durable, turn table made out of Chineseum (look it up) so don't drop it.
E**N
Table works but light doesn't
The table starts to turn as soon as the battery is in. There is no on off switch so you have to take the battery out. The light looked great for about 30 seconds flickered a couple times and died. It won't come back on.
A**L
For 20 buck?!! Get outta here
Excellent value. The light is VERY intense WEAR EYE PROTECTION. The little turn table is awesome.
Trustpilot
1 day ago
2 days ago