Finware XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery (10 Pair)

want to start off by saying that I did get this at a discount in exchange for my honest review and that is what you will get. Now that that is out of the way..whether you are new to toys or a novice it is always nice to have a simple vibrator. I have a ton of all different kinds of toys but sometimes you just want something than is a simple design and just vibrates. This multi-speed bullet is really nice, it feels good to hold and good elsewhere ;) It does use batteries which I think is awesome, I never remember to plug in toys so they aren't ready when I need them, so being able to just pop in some AA's is a perk for me. The speed varies and you can twist it to get it exactly the way you want. I wouldn't use this in water, I don't think you can fully submerge it, but I'd say it's safe to play and then clean it properly and it will last you a good while. Don't forget to always take out the batteries when you are done playing. The recipient was quite happy to receive it. I did not try it but after asking the recipient about it, she said that it was a great gift and worked well. I am glad. It takes 2 AA batteries and the batteries were not included in the package. The item was in the discreet package to send to you, no one knows what it is. The end cap plastic is hard and I am unsure as to whether it is breakable. Like I said, I did not use it but heard from the user that it is awesome and that she really liked it. She said it was better than her boyfriend and she didn't have to cook dinner and do dishes to get anything from it. I thought that was funny. She said it hit the spot quickly and that she was grateful to me for gifting it to her.Overall, I think it does exactly what it intends to do. The product is well represented and simple to use.I was given an extremely small ( and I mean small) discount on this product in exchange for my honest and unbiased review of this product. I believe I have given that and do recommend this product for most any person who has been thinking of purchasing one. It works very well and never disappoints, as some dates might. It looks nice and is a bargain for the price. So you should pick one up tod

Bought these for a Creality Ender 3 Pro 3D Printer.There have been lots of reports of the XT60 connectors on these printers to be lower quality, and therefore I was paying a close eye on mine.During log printing projects I realized that the connectors were getting extremely hot (to hot to be held with the fingers) therefore I decided to buy these to replace the connector.One of the results I found and impressed me was that the new connectors just got slightly warmer that room temperature, I didn't expected so much difference.Even though I bought the 10 pair pack only needing 1, I recommend to any Ender 3 Pro owner to pay attention to their XT60 connectors, if they get hot, change them immediately, this is a know fire hazard.Provided picture is the purchased XT60 on the left and the stock Creality part on the right.

Overall a great value. Although these things are used for RC projects primarily, I use these for general use whenever I need low voltage interconnects that carry a respectable amount of power. I rate these as 4 stars instead of 5 because instead of individual small pieces of heat shrink, the package came with several larger pieces. Normally I'd be fine with that, except that there is no way that once cut up into individual pieces they'd be as long as the individual pieces, so there is overall a net reduction in the amount of tubing provided. For the price, not really a big deal.The trick to these is that you need a pretty beefy soldering iron to solder these without melting the housings. You need a big iron that can heat the connection fast, allowing you to apply solder quickly then remove the heat. With smaller irons, by the time the connection gets hot enough to solder properly, the heat has spread far enough to start melting the housings. I do not use my normal irons for these, I use a butane powered Weller iron. Anyone working with these types of connectors regularly should invest in one, or an electric iron that is at least 60 watts.

These are really solid connectors. I used them to allow easy connection/disconnection for speaker wires in an overhead sound bar. They have a very solid and tactile feel when connection is made and it takes enough effort to unplug them to prevent it accidentally coming apart. The soldering was a bit tight though as there is not a lot of the metal connector protruding out of the connector to preheat but as long as you have a good iron it's no problem. The plastic did not melt or distort while i was making the connection either. The included pre-cut shrink wrap is a nice touch too but i trimmed it down a bit to keep the wires a bit more flexible at the ends. I also staggered the location of the connectors on each wire of each speaker's pair to keep the bulk down...

For the price these are a good set of connectors. The number of pieces you get is such that I can finish a project or two and still have extras for later. The added shrink tubing was a nice touch although it doesn't match the picture online. I didn't get individually cut pieces. Instead I got 2 sections tubing, one red one black. However I DID use my own shrink tubing only because the ones provided seemed a teeny tiny tad bit too large and didn't slide all the way down enough for MY liking. I can be a bit fussy however..Overall, I would order these again if I needed more. I have no complaints about them and had no issues soldering my wires to the connectors.

first thing I noticed when soldering...they solder very easy with a good 25W soldering iron and good solder..the fit is snug.. but I would have been worried if they were loose. !it takes a little pull to get them apart... I think the fit is just right...I also soldered some larger battery cables on them with no trouble...I still have to check them under full load of around 50 amps... I replaced myDeans connectors with these... I do think this is a better connector and has better connections for soldering.

These connectors are great because they create a firm connection to your speakers. As a bonus they only connect one way, so as long as you have soldered the positive and the negative on both speaker and input the correct way round, it will always be connected the right way no matter how many times you need to unplug them. The terminals are solid and great for soldering too. This is a quality item if you want to change up from the old fashioned speaker spade terminals.

have used these fittings before on model aeroplanes used these on ebike batteries 48v 750 wat ok